Warlock ha scritto:
barnettgs ha scritto:
Try portforwarding site? -
portforward.com/english/routers/port_for...g/TP-Link/TD-W8901G/
Use port: 27886-27888 on both TCP/UDP (or ANY).
Nothing... I think that I need to follow a procedure step by step. Because I don't understand where I'm wrong.
Ok
Go to Advanced Setup > NAT > Virtual Server
Then:
Rule Index: 1
Application: SWOS
Protocol: ALL
Start Port Number: 27886
End Port Number: 27888
Local IP Address: IP ADDRESS (address of your laptop/PC - e.g. 192.168.1.100)
To find this out, run CMD on your pc and type: ipconfig /all
Then look for IP ADDRESS - this is your IP address
Although your computer would change its ip if you turned it off/on so you need to set your computer with static ip (fixed address, non-changing).